AutoDrill
1221 US Hwy 22
Lebanon, NJ  08833
Ph. 800-871-5022
Fax: 908-542-0242

Send E-Mail
Visit
MultiSpindle-Drill-Heads.com
Drilling Primer
AutoDrill Products
Self-Feed AutoTap
Attachments

Spindle Drives
Electro-Mechanical
Pneumatic (Air)
Hydraulic (Oil)

Pneumatic Controls
Electric Controls
Accessories
System Selection
Application Examples
Download Catalog
CAD Drawings
Request Information



2000 Series AutoDrill

The Series 2000 AutoDrill is a pneumatic controlled self feeding drill.  Pneumatic stroke controls allow the Series 2000 Autodrill to perform many basic drilling operations.  The units may be installed in any orientaton.  This allows operations, that are difficult to drill manually, to be setup for trouble free production.  

Stroke control is usually adjusted by varying the line pressure and flow regulation with pneumatic flow controls.  The controls usually have only one stroke speed and are suitable for most blind hole and many less critical thru hole drilling applications.  For two speed operation or critical drilling operations we offer our Series 2100 AutoDrills.

Multiple units can easily be controlled simultaneously for high production drilling requirements with a single pneumatic directional valve.  Our Cycle Automation control is optionally available for this use.  

The main features of the Series 2000 AutoDrill are:

  • Self feeding capabilities with air or oil
  • Thrust forces to 450 lbs on shop air
  • Maximum input torque: 80 in-lbs
  • Spindles speeds to 8000 RPM
  • Spindle Stroke to 9"
  • Narrow 3" width for close center drilling
  • Built-in precision depth control
  • All position mounting
  • Engineered to operate with our optional accessories
  • Easily upgraded to our Series 2100 AutoDrill
  • Spindle input is easily adapted for any type drive
  • Standard precision ground #33 Jacobs spindle
  • Many optional spindles in stock


drill features


Common Spindle Options:

  • JT33 (Jacobs) - Standard
  • JT3 (Jacobs)
  • 5/8-16 Straight Male American Standard Thread Form
  • 3/4-16 Straight Male American Standard Thread Form

drill spindle options